We have further developed the first generation. You no longer need a main tank or hoses. As the name All in One suggests, the cassette contains everything and only needs to be mounted inside the vessel using the included adhesive. The same performance and quality as before, just much easier to install.
All-in-One 500: Price per unit 5900 NOK
All-in-One 500: Price per unit 5600 NOK
Made to save lives
Every year, lives are lost at sea, not only due to drowning, but also because of hypothermia when vessels take on water or sink. Many of these lives could have been saved, which is why Antisink was developed. Antisink Large Boat Kit is a fixed-mounted safety system with high lifting capacity that automatically deploys if water enters the vessel, keeping it afloat until help arrives.
This product is not only effective out at sea. If an incident occurs while the vessel is moored, Antisink helps protect valuable components such as the engine and electronic equipment by keeping them above water for up to several weeks.
Order here
All-in-One 500 provides 275 kg of buoyancy per unit
All-in-One 300 provides 165 kg of buoyancy per unit
All-in-One 160 provides 90 kg of buoyancy per unit
Select the desired weight to view details
Antisink All-in-One
Price range: kr 5600 through kr 23300
Description
We have further developed the first generation. You no longer need a main tank or hoses. As the name All in One suggests, the cassette contains everything and only needs to be mounted inside the vessel using the included adhesive. The same performance and quality as before, just much easier to install.
Additional information
| Maximum weight | 600kg, 1200kg, 1900kg, 2500kg, 3100kg |
|---|
Related products
Designed and manufactured in Norway
Antisink is manufactured in Norway and meets all required approvals, with quality ensured at every stage. Refer to the product table to determine which package is suitable for your vessel’s weight class.
Certified and robust
All Antisink products are CE and PI certified and comply with national and international standards for product safety and maritime safety. The systems are compact, impact resistant, waterproof and flame retardant. They can also be manually activated if required.
With a focus on the environment
All components are reusable and recyclable. If an Antisink system is deployed, it only needs to be repacked before it can be used again. The only component that must be replaced is the CO₂ trigger, while the CO2 cylinder can be refilled. Antisink can easily be installed and repacked by the user by following the installation instructions. If in doubt, we recommend contacting your boat dealer for assistance.
Antisink All-in-One is a system that is easy to install and requires no external connections. Simply install the correct number and size of units based on the vessel’s total weight. The units are bonded directly into the vessel and are ready for use after 24 to 36 hours, depending on the ambient temperature during installation.
All buoyancy bags are equipped with an overpressure relief valve to prevent rupture if compressed. Each bag is filled to approximately 80 percent capacity, allowing it to adapt to its surroundings. There is flexibility of approximately ±10 percent in the inflated volume if the unit is installed in a compartment that does not exactly match the inflated dimensions.
Everything required for installation is included, including installation instructions.
| Technical specifications | |||
|---|---|---|---|
| Item no. / model | Unit dimensions | Inflated dimensions | Buoyancy |
| All-in-One 500 | 580 × 185 × 80 mm (L×W×H) | 1250 × 450 × 600 mm (L×W×H) | 275 kg at 20 °C | 256 kg at 0 °C |
| All-in-One 300 | 480 × 170 × 65 mm (L×W×H) | 1100 × 400 × 450 mm (L×W×H) | 165 kg at 20 °C | 153 kg at 0 °C |
General information for All-in-One
Trigger: UML Pro Sensor Elite with cellulose | CO2 cylinder: 300 g / 500 g Welz GmbH | Overpressure valve: Halkey-Roberts