Description
Flip Over consists of a CO₂ tank, water sensor, and buoyancy bags combined into a single unit. The system provides 275 kg of buoyancy per unit and activates automatically if the vessel capsizes or ends up upside down in the water.
Designed and manufactured in Norway
Antisink is manufactured in Norway and meets all required approvals, with quality ensured at every stage of production.
Certified and robust
All Antisink products are CE and PI certified and comply with national and international standards for product safety and maritime safety. The systems are compact, impact resistant, waterproof and flame retardant. They can also be manually activated if required.
With a focus on the environment
All components are reusable and recyclable. If an Antisink system is deployed, it only needs to be repacked before it can be used again. The only component that must be replaced is the CO₂ trigger, while the CO2 cylinder can be refilled.
Antisink can easily be installed and repacked by the user by following the installation instructions. If in doubt, we recommend contacting your boat dealer for assistance.
Flip Over is a self-contained system that is easy to install with no external connections required. The unit is simply bonded to the hardtop or targa arch and is ready for use after 24–36 hours, depending on ambient temperature during installation.
All buoyancy bags are equipped with an overpressure relief valve to prevent rupture if compressed. Each bag is filled to approximately 80 percent capacity, allowing it to adapt to its surroundings. There is flexibility of approximately ±10 percent in the inflated volume if the unit is installed in a compartment that does not exactly match the inflated dimensions.
Everything required for installation is included, including installation instructions.
General information for All-in-One
Trigger: UML Pro Sensor Elite with cellulose
CO2 sylinder: 500 gram Welz GmbH
Overpressure valve: Halkey-Roberts