Used to lift or stabilize boats taking on water or raise the ones that has already sunk.
The system is supplied in two cases. One contains three buoyancy bags with hoses, while the other contains three pre-charged CO2 cylinders. Both cases weigh less than 20 kg and are designed for quick and easy use by emergency vessels responding to a distressed vessel.
The system is supplied in two cases. One contains three buoyancy bags with hoses, and the other contains three pre-charged CO2 cylinders. Both cases weigh less than 20 kg and are designed for fast and easy use by emergency vessels responding to a casualty.
In addition, we have developed a dedicated fire suppression handle. If the vessel is on fire, this can be quickly connected and used with the pre-charged CO2 cylinders to extinguish the fire. The system is fully reusable. Buoyancy bags, hoses and cases can be used repeatedly, making the solution cost-effective, environmentally friendly and sustainable.
Antisink Rescue Kit:
One kit consists of three CO2 cylinders and three buoyancy bags, distributed across two cases. The system is supplied complete with all necessary hoses and connectors.
The system provides a minimum lifting capacity of 1,650 kg at water temperatures between 0 and 5 °C. At water temperatures between 20 and 25 °C, the lifting capacity can be increased to up to 1,800 kg.
Both cases meet the requirements of the ISO IP67 standard and weigh 19 kg each when fully equipped. The external dimensions of each case are 45 cm in height, 50 cm in width and 28 cm in depth. The cases are identical.
All components in the sets are reusable and developed with a focus on sustainability and recyclability.
Made to save lives
Every year, lives are lost at sea, not only due to drowning, but also because of hypothermia when vessels take on water or sink. Many of these lives could have been saved, which is why Antisink was developed. Antisink Large Boat Kit is a fixed-mounted safety system with high lifting capacity that automatically deploys if water enters the vessel, keeping it afloat until help arrives.
This product is not only effective out at sea. If an incident occurs while the vessel is moored, Antisink helps protect valuable components such as the engine and electronic equipment by keeping them above water for up to several weeks.
Designed and manufactured in Norway
Antisink is manufactured in Norway and meets all required approvals, with quality ensured at every stage. Refer to the product table to determine which package is suitable for your vessel’s weight class.
Certified and robust
All Antisink products are CE and PI certified and comply with national and international standards for product safety and maritime safety. The systems are compact, impact resistant, waterproof and flame retardant. They can also be manually activated if required.
With a focus on the environment
All components are reusable or recyclable. If an Antisink system is deployed, it only needs to be repacked before it can be used again. The only component that must be replaced is the CO2 trigger, while the CO2 cylinder can be refilled. Antisink can easily be installed and repacked by the user by following the installation instructions. If in doubt, we recommend contacting your boat dealer for assistance.
| Technical specifications | |||
|---|---|---|---|
| Item no. / model | Vessel size (tot. weight) | Buoyancy | Dimensions |
| All-in-One 2500N | < 600kg | 250kg | 440 × 180 × 125 mm (L×W×H) |
| All-in-One 5000N | < 1200kg | 500kg | 440 × 180 × 125 mm (L×W×H) |
| All-in-One 7500N | < 1900kg | 750kg | 440 × 180 × 125 mm (L×W×H) |
| All-in-One 10000N | < 2500kg | 1000kg | 440 × 180 × 125 mm (L×W×H) |
| All-in-One 12500N | < 3100kg | 1250kg | 440 × 180 × 125 mm (L×W×H) |